I was a fan of the Catalyst Machine Works 9/10" Macro ‘Merica frame, but I didn’t purchase one before the company closed its doors to consumers.
I put together this frame to have similar features:
The way I built mine, I used a stacked 5mm arm design. So I have a 5mm arm on top with motor protection, and a 5mm lower arm without motor protection. I also used a single 5mm arm spacer so that the distance between the top and bottom plates is 15mm.
I used a Hobbywing 60A 30x30 ESC between the top and bottom plates, with the 20x20 Flight Controller mounted on top plate with the HDZero VTX.
Copyright Cncmadness. All Rights Reserved. by 3dcart eCommerce Hosting.
