Note: We are not the designer and are not responsible if the frame isn't as you want. We only cut the files provided and its your responsibility you do your research about the frame before purchasing. Frame are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at [email protected], and someone will get back to yo as soon as possible. It is also suggested to check the Facebook groups or contact the designer if you have any other questions.
The Ranger 3.5 is a frame and canopy system designed to carry either the Walksnail Avatar HD Nano Camera V3 (4:3 sensor), or the HDZero Nano 90 camera with the upgraded 1.8 mm HDZ3301 lens. The focus of this frame was a small quad that can fly longer range yet retain uncompromised proximity performance. It was designed around the Tmotor 1404 3800kv motors with HQ 3.5 x 2.5 x 3 props and Tattu 4S 550 batteries. This formula was developed by Recursion Labs to provide an incredible power to weight ratio with good efficiency. Given the power available, I kept the base plate robust to minimize any mechanical noise issues. The high quality of life quick release canopy system from the Touring 122 is updated and carried over. Loosening just 1 screw allows removal of the canopy and gives full unobstructed access to the flight controller and VTX.
For a full detailed overview of the frame: https://youtu.be/9yxJdHkZPyE
Frame: 148 mm MTM, 4 mm thick carbon fiber
FC: 25.5 x 25.5, 20 x 20 square orientation
Motor Mounting: M2 on 9 - 12 mm diameter
Props: 3.5 inch
Frame Weight with Canopy (approximate): 25 gm
Copyright Cncmadness. All Rights Reserved. by 3dcart eCommerce Hosting.