We have partnered with Tallotte Louis to provide the manufacturing and shipping of this design. With the purchase of this frame, we provide all CF and Hardware for the frame. Our production goal for this frame is 3 - 5 days but can be affected buy work load at the time of the order.
For any 3d printing needed for the frame, please check out https://www.brain3d.co/ and they will help with anything you need.
The oplus would be the ideal frame for a 2.5 or 3 inch ultra light nano build « toothpick drone ». It
will permite you to push push the weight/power ratio beyond the limit to get better performance
during the flight. The structure have been well thought out to make it both robust and well balanced.
That’s why there is also an excess of material all around the motors to protect them from crashes as
well as they are mounted with four M2 screws to avoid annoying vibrations.
Characteristic :
thickness : 2mm
displacement : 115mm
FC dimensions : 25.5 x 25.5 AIO whoop orientation
Motors mounting screws: M2 on 9mm diameter
Building recommandation :
Fc : F4 12A/16A AIO
Motors : between 1102 and 1204
Cam : Caddx Ant
Vtx : eachine nano vtx
Battery : 2s/3s 450 mah
Props : Gemfan 75mm 2-blades / Gemfan Ouragan 3020 3 inch
Note: We are not the designer and are not responsible if the frame is not as you hoped. We only cut the files provided and it's your responsibility you do your research about the frame before purchasing. Frames are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at
[email protected], and someone will get back to yo as soon as possible. It is also suggested to check the Facebook groups or contact the designer if you have any other questions.
Files lasted updated with Cncmadness on Sept 16, 2022