MOD-L 3-3.5-4-5 inch : modular ultralight frame (with separate arms)

Specifications

• 3, 4 or 5 inch squishX layout
• 16x16, 20x20 and 26x26 FC mount ( only the whoop mount is functional on a HD setup)
• 9mm and 12mm motor mount (12 only on the 5")
• 20x20 mount on the top plate as well

Pick your version

The MOD-L platform is modular, you can pick the following versions. A full frame is made with 4 arms, a bottom plate, a top plate and a cross plate. Please read the details below for details.

Arms (4 arms) :

• 3" slim
• 4" slim
• 4" beef (a more robust & heavy version)
• 5" slim
• 4" beef (a more robust & heavy version)

Frame plates (1 bottom & 1 top plates) :

• HD (for DJI Vista, Tarsier, Hybrid)
• Nano (for DJI Nebula or Nano Analogic cams)

note : the bottom plate is designed to use 6 x BETAFPV M2 Clamp nuts (pressnuts). You can buy a bag of those for a few bucks on Amazon or Betafpv.com directly.

The plates come in several variants :

• NORMAL : roomy in the front and in the back
• SHORTBACK : shorter back making the frame lighter.
• NANO : narrow front section for 14x14 nano size cams. same length as the normal version
• CARGO : an extra long version with dual 20x20 mount to allow one to use a 16x16 or 20x20 stack and put the vista in the rear.

The bottom reinforcement plate (cross plate) is the same for all version. The new one allows easy access to all the stack screws and is designed to be cut along the weave to be stiffer (90° elements).

• 3, 4 or 5 inch squishX layout
• 16x16, 20x20 and 26x26 FC mount ( only the whoop mount is functional on a HD setup)
• 9mm and 12mm motor mount (12 only on the 5")
• 20x20 mount on the top plate as well

1. Your choice of frame plates in 2.0mm CF
2. Your choice of arms in the indicated thickness
3. Hardware
• 6x M2 25mm Standoff
• 12x M2 6mm Button Head Screws
• 6x 8mm M2 Button Head Screws(3.0mm thick arms)
• 6x 10mm M2 Button Head Screws(3.5mm or 4.0mm thick arms)
• 6x M2 Pressnut(Installed)