The JeNo 3.5" (DKZ Version) is a 3.5" frame designed by members of the WE are FPV Community
This is an open source frame. We provide the manufacturing to order and provide as a kit. Included are the carbon fiber parts and assembling hardware. 3D printed parts are not provided. Any questions or concerns, please message us at [email protected]
Most production times are about 4-7 business days, but can be affected by work load at the time of the order.
For any 3d printing needed for the frame, files can be found at the 3D Print files tab. Please check out https://www.brain3d.co/ and they can help with having anything you need printed.
Note: We are not the designer and are not responsible if the frame is not as you expected. We only cut the files provided from the designer or from the source files links. It's your responsibility to research the frame before purchasing. Frames are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at [email protected], and someone will get back to you as soon as possible. It is also suggested to check @WEareFPV_476425 if you have any other questions.
If you cannot find what you are looking for and want to design your own, we would be happy to help out and provide a custom quote.
Carbon Fiber Parts:
4x 4.0mm Arms
1x 3.0mm Arm Key
1x 2.0mm Top Plate w/Countersinks
1x 2.0mm Mid
1x 2.0mm Bottom Plate w/Pressnuts(x4)
2x 2.0mm Camera Plates
Hardware:
8x M3 20mm Standoffs4x M2 12mm CS Screws6x M3 6mm CS Screws10x M3 8mm BH Screws5x M3 10mm BH Screws4x M2 Nuts
Copyright Cncmadness. All Rights Reserved. by 3dcart eCommerce Hosting.