The JeNo 3" Multiplates M3 v1.1 is a 3" frame designed by members of the WE are FPV Community
This is an open source frame. We provide the manufacturing to order and provide as a kit. Included are the carbon fiber parts and assembling hardware. 3D printed parts are not provided. Most production times are about 3 - 5 days, but can be affected by work load at the time of the order. Any questions or concerns, please message us at [email protected]
For any 3d printing needed for the frame, files can be found at the 3D Print files tab. Please check out https://www.brain3d.co/ and they can help with having anything you need printed.
Note: We are not the designer and are not responsible if the frame is not as you expected. We only cut the files provided from the designer or from the source files links. It's your responsibility to research the frame before purchasing. Frames are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at [email protected], and someone will get back to you as soon as possible. It is also suggested to check @WEareFPV_476425 if you have any other questions.
If you cannot find what you are looking for and want to design your own, we would be happy to help out and provide a custom quote.
The success of the JeNo 5.1" pushed us to develop a little brother, in 3 and 3.5" . This frame will therefore be as comfortable in Freestyle as in cinematic shooting . A 7" version of the JeNo also exists .On a 5" or more, you may be tempted to keep an Action Cam, whereas on a compact and light machine, the DJI O3 reveals all its potential .Designing a frame of this size ended up being trickier than expected:Weight is crucialSolidity and rigidity remain key pointsThe electronics are more exotic : 20x20 stack with separate FC and ESCs, straight or 45° AiO, fixing the stack in M2 or M3…The low inertia of this format makes the O3 camera gyro very sensitive , the vibration tolerance is much lower than in 5"A clear FOV : no spacer, frame, or propellers visible in the FPV returnAfter several iterations, we arrived at a first version of JeNo that ticks all these boxes! This is the 3" Classic version, unibody with a 4 mm bottom plate . We weren't initially keen on the unibody, but this approach ultimately proved to be an excellent compromise . With a thickness of 4mm at the bottom plate, we obtain exceptional solidity and flight behavior worthy of a 5". Assembly remains easy and the absence of separate arms allows you to slide a 20x20 stack taking advantage of the 20 mm height of the bus.Other versions are available:3.5" (attention: props visible in the FPV stream)3" LightSeparated arms4": this is a variation produced by Kennytak and the necessary files are available on his page . The props remain slightly visible in the FPV stream.The JeNo 3 follows in the footsteps of its big brother: the front cage inclined at 25° allows for a clear FOV . Notches are provided to slide in any type of ND filter and the propellers are not visible in FPV feedback or HD recording.
Frame Specs:
Geometry: Wide-X
Propeller sizes: 3 to 3.5" depending on the version
Weight: 40 to 55 g depending on the version, with hardware
Arm: 4 mm in unibody, 3 mm in separate arms
Bus height: 20 mm
Stack height: 20mm unibody
Motor center distance: 9 to 12mm
Camera: 20mm (DJI), Micro, Nano. Clear FOV . Adjustable.
Central stack: AiO 25.5 mm x 25.5 mm (M2) and stack 20 mm x 20 mm (M2)
Rear stack: 20mm x 20mm and 25.5 x 25.5mm (M2)
VTX Supported: Analog, DJI Vista, DJI Air Unit O3 , WalkSnail, HDZero…
Strap passage: Yes
Carbon Fiber Parts:
4x 3.0mm Arms
1x 3.0mm Arm Key
1x 2.0mm Top Plate
1x 2.0mm Top X Plate
1x 2.0mm Bottom Plate
2x 2.5mm Camera Plates(Freestyle or Cinematique)
Hardware:
8x M3 20mm Standoffs4x M2 12mm CS Screws6x M3 6mm CS Screws10x M3 8mm BH Screws5x M3 10mm BH Screws4x M2 Nuts
Source Files:
https://github.com/WE-are-FPV/JeNo-3-3.5
3D Printed Parts:
https://github.com/WE-are-FPV/...
Copyright Cncmadness. All Rights Reserved. by 3dcart eCommerce Hosting.