This is an open-source frame which we provide the carbon fiber and hardware. A purchase is not a purchase of a product, but a request for cutting the parts. Normal cutting time is about 3 - 5 days from the time of order but can be affected when there is a high cutting volume in the shop. Files for the 3d printed parts can be found at the Thingiverse links below. For details on the frame, please make sure to check the links as we are not the designer and not responsible if the frame is not what you expected. If you have any questions, you can message us and we will do our best to answer.
Summary
V2 of the FR5.5H!
https://www.thingiverse.com/thing:3924330
Fits FR7 prints and should fly 2207/2208 motors with 5552 props.
Front Plate: 2.5mm
Rear Plate: 2.0mm
Top Plate: 2.5mm
Arms: 6mm
3mm Standoff, Round (5mm OD), 10mm; 2; Front
3mm Standoff, Round (5mm OD), 20mm; 2; Rear
3mm Standoff, Round (5mm OD), 28mm; 2; Cam Uprights
3mm Standoff, Round (5mm OD), 30mm; 2; HD Camera Holder
3D Print files: https://www.thingiverse.com/thing:3601947
Note: We are not the designer and are not responsible if the frame isn't as you want. We only cut the files provided and its your responsibility you do your research about the frame before purchasing. Frame are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at
[email protected], and someone will get back to yo as soon as possible. It is also suggested to check the Facebook groups or contact the designer if you have any other questions.
If you can't find what you are looking for and want to design your own, we would be happy to help out and provide a custom quote.
Files lasted updated with Cncmadness on Oct 11, 2022